PRODUCT DESCRIPTION Sikaflex®-11 FC is a one-component, gun-grade, adhesive and sealing compound of permanent elasticity. This dual-purpose material is based on a special moisture-cured polyurethane with an accelerated curing time that meets ASTM C920 Type S, Grade NS, Class 12.5, Use NT, I, M, A, O. and Federal Specification TT-S00230C, Type II, Class B. USES As an elastic adhesive for noncritical applications like: ▪ Cover plates, gaskets and coverings ▪ Acoustic ceiling tiles ▪ Floor moldings and door sills ▪ Light weight construction materials ▪ Wood or metal and door frames ▪ Roof tiles As an elastic joint sealer for: ▪ Air ducts and high vacuum systems ▪ Containers, tanks, and silos Gaskets in openings in walls or floors for ducts, piling, etc. ▪ ▪ Reservoirs or water retaining structures ▪ Aluminum fabrication ▪ Bolted lap joints CHARACTERISTICS / ADVANTAGES Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, wood, epoxy, polyester and acrylic resin ▪ ▪ Fast cure rate ▪ Good weathering and water resistance ▪ Non-corrosive Can be painted over with water, oil, and rubber-based paints. (Preliminary tests recommended). ▪ ▪ High durability ▪ Can be used in tamper resistant joints. APPROVALS / STANDARDS ASTM C920 Type S, Grade NS, Class 12.5, Use NT, I, M, A, O ▪ ▪ Federal Specification TTS-00230C, Type II, Class B Certified to NSF/ANSI/CAN 61 for potable water (meets applicable requirements of NSF/ANSI 600).