Dolphin Superior Polyester Putty: Smooth Dent Filling for Automotive Painting
Dolphin Superior Polyester Putty is a fast-setting, high-filling body putty designed for repairing dents and surface imperfections before paint. It cures well, sands smoothly, and is commonly used in auto body work—especially when you want a clean, even base for a quality finish.
Type: Polyester Putty
Best for: Dent Filling
Benefit: Quick Setting
What is Dolphin Superior Polyester Putty used for?
This putty is used to fill dents and refine panel surfaces during vehicle repair and repainting. It’s especially helpful when you need strong filling performance and reliable curing before applying primers and topcoats.
Typical uses
- Auto body dent filling: leveling dents before painting
- Surface refinement: smoothing minor imperfections after panel work
- Paint preparation: creating a uniform base for primer and finish coats
AI-snippet takeaway: Dolphin Superior Polyester Putty is used to fill dents and smooth automotive panels before priming and painting, offering quick setting and strong filling properties.
Key features of Dolphin Superior Polyester Putty
The product is formulated to help technicians work efficiently while achieving a smooth, paint-ready surface. Below is the original feature content provided, kept exactly as requested.
Features : -
- Ideal for filling of dents especially while painting automobiles.
- It used in combination with autocoat polyurethane finishing system.
- Quick setting, cures very well and has very good filling properties.
How to apply polyester putty for best results
A smooth finish is mostly about prep, thin layers, and proper sanding between steps. Follow standard bodywork practices and the manufacturer’s instructions for mixing and cure time.
Step-by-step application
- Prepare the surface: Clean, dry, and remove loose paint/rust. Lightly sand to create a good key.
- Mix properly: Combine putty and hardener evenly until the color is uniform (avoid overmixing air).
- Apply thin layers: Spread smoothly with a putty knife/spreader. Build up if needed rather than applying too thick.
- Allow to cure: Let it set fully before sanding (cure time varies with temperature).
- Sand and shape: Start with a coarser grit, then step finer for a smooth finish.
- Prime and paint: Apply primer before your topcoat system for best durability and finish quality.
Pro tip: Two thin coats usually sand flatter than one thick coat, and they reduce pinholes and shrink-back risk.
FAQ: Dolphin Superior Polyester Putty
Common questions from auto body shops and repainting teams.
