MAG BRD03
TRAFFIC DETECTOR with LED
-No need install loop coil wire underneath floor
-Faster installation to lower labour cost
-Double safety and accuracy with DualRay
-Detect metal and human
-Works well on any surface like interlocking brick
-Detect any height vehicle including container truck
BRD03 DualRay with LED Display is a double accuracy traffic detector typically
installed onto the exterior of barrier gate housing to detect a vehicle or human passing.
It uses Frequency Modulated Continuous Wave (FMCW) to calculate the distance
of any object within the detection area. The reading range can be programmed from 1m to 6m.
Description
Cutting floor to install loop coil is the most time-consuming and labour-intensive job
when installing a barrier gate. What if you can save money by cutting down
the installation time and labour required to install a barrier gate ?
Double detection, double safety
DualRay technology recognize the 3D space of detection area more accurately
to minimize false trigger that can cause barrier arm to hit on people and car.
Reduce installation time to just 30 minutes
BRD03 DualRay uses frequency to detect vehicles and therefore does not require any loop coil.
All you need to do is to mount it onto the barrier gate housing. A traffic detector is a faster and easier alternative to a loop detector.
Less hassle to setup
Unlike other brands that require connecting to software via a data port, the BRD03 DualRay and
LED Display setting can be programmed by the built-in dual push button.
With the LED display it’s much more easy to configure according to end user desire setting.
Safer
Other than a vehicle, a traffic detector can also auto reverse the arm when detecting a human.
This is the added safety feature that is not available at loop detectors where it can only detect metal.
Strong environment adaptability
The traffic detector does not require any underground loop coil therefore its performance is not affected by rain,
heat, dust, cold and harsh weather condition.
Work on any vehicle
One of the biggest challenges of loop coil is to detect big truck as there are typically higher above ground.
BRD03 DualRay is enhanced with dual-lens 3D detection where it can detect vehicles of any height more accurately.
The wider coverage area of BRD03 DualRay also allows it to detect small vehicles such as a motorcycle or even a bicycle.
Work on any surface
Loop coil might not work well on interlocking bricks, soiled road or metallic plates typically
found in the construction site. A traffic detector will be the best alternative to a loop detector in these road conditions.
