Products Detail
PENTENS T-200
UV Resistant Elastomeric Waterproofing Coating
PENTENS T-200 is a newly developed Acrylic polymer waterproofing coating offering a hardness and durability. It resists ageing from heat, sunlight and ozone. It has excellent gas impermeability and toughness, and remains flexible at low temperatures. It is a warranted roofing and tanking product.
ADVANTAGES
USES
PENTENS T-200, which is one-part elastomeric cross linking latex copolymer emulsion designed as exposed waterproofing coating on:
APPLICATION
Surface Preparation
Surface must be sound, dry and clean (free of dirt, gravel, pollution, mildew and all foreign material). Apply if any rain is imminent. Repair flashings and damaged areas. Cracks and old bitumen joints shall be repaired first.
Application :
PENTENS FLESEAL T-200 is suggested to apply 2 coats. Apply the frst coat of PENTENS FLESEAL T-200 on the application surface. Leave to cure for approximately 2 hours before applying second coat. PENTENS FLESEAL T-200 can be installed with conventional airless spray equipment, brush or roller.
Coverage: On concrete roofs - 1kg/m2/2 layer, On facade/vertical - 1kg/m2/2 layer
Coverage (1.5kg) = ~16sqf)
SAFETY
Impervious gloves and barrier cream should be used when handling these products. Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist. If contact with skin occurs, it must be removed before curing takes place. Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent. Ensure adequate ventilation when using these products.
UV Resistant Elastomeric Waterproofing Coating
PENTENS T-200 is a newly developed Acrylic polymer waterproofing coating offering a hardness and durability. It resists ageing from heat, sunlight and ozone. It has excellent gas impermeability and toughness, and remains flexible at low temperatures. It is a warranted roofing and tanking product.
ADVANTAGES
- Water based, environment friendly
- Gas and oil resistant
- UV Blockers
- No blistering, cracking and peeling
- Chemical resistant and waterproof
- User friendly, suitable use on any surface
- Can withstand foot traffic
- Non-toxic
USES
PENTENS T-200, which is one-part elastomeric cross linking latex copolymer emulsion designed as exposed waterproofing coating on:
- RC gutters and planter boxes
- Floor slabs
- Deck
- Wood siding/Fences
- External wall
- Flat roof
- Metal roof
- Concrete structures
APPLICATION
Surface Preparation
Surface must be sound, dry and clean (free of dirt, gravel, pollution, mildew and all foreign material). Apply if any rain is imminent. Repair flashings and damaged areas. Cracks and old bitumen joints shall be repaired first.
Application :
PENTENS FLESEAL T-200 is suggested to apply 2 coats. Apply the frst coat of PENTENS FLESEAL T-200 on the application surface. Leave to cure for approximately 2 hours before applying second coat. PENTENS FLESEAL T-200 can be installed with conventional airless spray equipment, brush or roller.
Coverage: On concrete roofs - 1kg/m2/2 layer, On facade/vertical - 1kg/m2/2 layer
Coverage (1.5kg) = ~16sqf)
SAFETY
Impervious gloves and barrier cream should be used when handling these products. Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist. If contact with skin occurs, it must be removed before curing takes place. Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent. Ensure adequate ventilation when using these products.