Sika AnchorFix® offers a range of high-performance, two-component adhesive anchoring systems designed for securing threaded rods, reinforcing bars, bolts, and other fastening systems into various substrates. These adhesives are formulated to provide strong, durable bonds suitable for both structural and non-structural applications.
Product Features:
-
Fast Curing: Rapid setting times facilitate quick installation and load application.
-
High Load Capacity: Engineered to withstand substantial loads, ensuring reliability in critical applications.
-
Versatile Applications: Suitable for use in cracked and uncracked concrete, masonry, hard natural stone, and solid rock.
-
Non-Sag Formula: Maintains position without dripping or sagging, even in overhead installations.
-
Solvent and Styrene-Free Options: Environmentally friendly formulations available, reducing harmful emissions.
-
Wide Temperature Range: Effective performance across various temperature conditions.
Applications: Ideal for anchoring:
-
Rebars and reinforcing steel
-
Threaded rods
-
Bolts and special fastening systems
-
Structural steel elements
-
Handrails and balustrades
-
Facade systems
-
Machinery and equipment bases
Usage Instructions:
-
Surface Preparation: Ensure the substrate is clean, dry, and free from oil, grease, and other contaminants.
-
Drilling: Drill holes to the specified diameter and depth.
-
Cleaning: Thoroughly clean drilled holes using appropriate brushes and air blowers to remove all dust and debris.
-
Injection: Insert the cartridge into a suitable dispensing gun, attach the mixing nozzle, and dispense the adhesive starting from the bottom of the hole, withdrawing slowly to avoid air pockets.
-
Insertion: Immediately insert the anchor (e.g., threaded rod or rebar) into the adhesive-filled hole, rotating slightly to ensure full coverage. Sika USA
-
Curing: Allow the adhesive to cure as per the specified time before applying any load. Curing times vary based on the product variant and ambient conditions.
