AR300U Xclone UHF Long Range Wiegand Reader – Reliable Parking Access Control
Enhance your mid-range parking and access control systems with the AR300U Xclone UHF Long Range Wiegand Reader, engineered for reliable vehicle identification at distances of up to 10 meters*, depending on solar film, environmental conditions, and card positioning. Featuring a durable PET housing that withstands sun and rain, it ensures long-lasting performance in diverse environments. Equipped with a mounting bracket, LED status indicators, and customizable software settings, the AR300U Xclone offers a versatile and user-friendly solution for efficient and secure parking access management.
*Distance may vary based on environmental factors and tag type.
Feature Highlights
LESS MAINTENANCE
UHF card is passive (no battery required).
TRIGGERED READING
Reads only when trigger signal is enabled (recommended with loop detector).
DELAY FUNCTION
5-second preset delay for subsequent readings to avoid anti-passback error.
COMPLIANCE TO MALAYSIA REGULATION
Certified by Malaysia SIRIM & MCMC.
USER FRIENDLY
LED indicators – Red (no card), Blue (successful read).
PROGRAMMABLE PARAMETERS
WG26 / WG34, delay time, trigger or continuous reading, and more.
Specifications
| Dimension |
215 × 225 × 52 mm |
| Frequency |
919–923 MHz (Malaysia SIRIM MCMC compliant) |
| Data Output |
Wiegand 26/34 |
| Reading Range |
Up to 10m (2–6m with solar film) |
| Input |
DC12V, 100mA (idle), 500mA (active) |
| Power Consumption |
2W |
| Output Power |
30 dBm |
| Protection |
IP66 (waterproof & weatherproof) |
| Operating Temp |
-20°C to +70°C |
| Storage Temp |
-40°C to +85°C |
| Humidity |
0–95% (non-condensing) |
| Standards |
ISO 1800-63 |
| Net Weight |
0.8 kg |
Recommended Application
UHF Card Specification
UHF card is made of PEC material that can withstand heat at vehicle windshield.
| Material |
PEC (heat resistant on windshield) |
| Type |
Passive RF backscatter |
| Read Distance |
Up to 1000 cm (depends on solar film/environment) |
| Memory |
64 bits read-only (38 bits Unique ID, 16 bits CRC) |
| Multiple Read |
50 tags/sec (binary-tree system) |
| Size |
85 × 53 × 1 mm |
| Operating Temp |
-20°C to 65°C |
| Life |
10 years |
| Installation |
Keep at least 10mm clearance from windshield surface |
UHF Sticker Specification (CDUT133L)
CDUT133L UHF sticker can place at car number plate or side mirror. The frequency range is 902 – 928MHz.
| Placement |
Number plate / side mirror (not on windscreen or metal surfaces) |
| Frequency |
902–928 MHz |
| Operating Distance |
~10m (antenna dependent) |
| Memory |
240 bits EPC memory |
| Write Cycles |
100,000 |
| Data Retention |
10 years |
| Write Protection |
Blockwise |
| Form |
Wet inlay, label |
| Multi-read |
Yes |
| Water Resistant |
Yes |
| Operating Temp |
-20°C to +80°C |
| Static Pressure |
10 N/mm² |
| RF Protocol |
ISO / IEC 18000 |
Sticker Placement Guidelines
The sticker can be applied on the side mirror—ensure the surface is clean before placing it.
It may also be installed on the front number plate, but please clean the area thoroughly before application.
**Do not place the sticker on the windscreen, metal surfaces, or near metallic objects, as this will significantly reduce the reading range.
