APPLICATION DIRECTION
1. Surfaces must be clean, dry and free of dirt, grease, oil or water.
2. Stir adhesive before use.
3. Apply the adhesive to both surfaces to be bonded with a dry, clean brush or scraper to give a uniform coating.
4. Allow the solvents to evaporate until the adhesive film is touch dry. It will take between 5 to 15 minutes depending upon surface porosity and weather condition.
5. Allowing the solvent to evaporate completely before assembly is essential to obtain a secure, permanent bond.
6. Position the coated surfaces accurately before assemble them.
7. Apply even pressure to consolidate the bond.
CAUTION
Highly flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness. Suspected of damaging fertility. Suspected of
damaging the unborn child. May cause damage to organs (nervous system, central nervous system) through prolonged or repeated exposure (inhalation). Harmful to aquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. - Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Wear protective gloves / protective clothing / eye protection / face protection / hearing protection.
OUR WEBSITE IS http://www.velocitydiy.com
CONTACT NUMBER IS +6014-9891223
