Guardian Splash-Zone 100 Systems
The GUARDIAN Splash-Zone 100 System protects piles against corrosion in sheltered or non-exposed water locations, where swell/wave height is typically less than or equal to 2.0m. For example, Harbour, Bay or similar.
Providing 25+ years of Corrosion Protection Performance, the GUARDIAN Splash-Zone 100 System possesses true surface tolerance, being applied above and below water, and making the GUARDIAN Splash-Zone 100 System an ideal choice in relatively non-exposed conditions.
BENEFITS
- Performance Driven : Providing 25+ years of protection in severe, open water environments, the combination of Petrolatum Materials with generically, 85+ years in proven performance in asset protection (longevity and effectiveness), coupled with the highly tensioned GUARDIAN Splash-Zone 100 System and HDPE Outer Cover system, protects the pile from aggressive atmospheric and chemical environments.
- Surface Tolerance : The system has been developed to be surface tolerant requiring a "St2" surface preparation in accordance with ISO8501-2007
- For Moderate Corrosive Environments : the GUARDIAN Splash-Zone 100 System is unaffected by water, acids, salts. Protection from anaerobic & aerobic corrosion.
- No Curing : Ready for immediate service.
- VOC Content : 0%
SYSTEM COMPONENTS :
- GUARDIAN Splash-Zone Primer MP fills surface pitting and passivates surface rust.
- GUARDIAN Splash-Zone Mastic MM fills voids and profiles angles.
- GUARDIAN Splash-Zone Tape MT encapsulates the substrate in a water and chloride resistant sheath.
- GUARDIAN Splash-Zone 100 Outer Cover provides substantial physical resistance and durability. Supplied c/w Guardian Edge Strip
