Norton Clipper Multi-Material Diamond Blade (100 x 16/20mm): One Blade for Mixed Cutting Jobs
The Norton Clipper Multi-Material Diamond Blade (100 x 16/20mm) is designed for contractors and DIY users who frequently switch between materials. Built for mixed applications, it helps deliver clean, controlled cuts on both masonry-type materials and selected metals—reducing blade changes and downtime.
Diameter: 100mm
Bore: 16/20mm
Use: Multi-Material Cutting
What is the Norton Clipper Multi-Material Diamond Blade used for?
This blade is typically used for repair, renovation, and site work where you might cut multiple materials during the same job. It’s especially useful for installers who need reliable performance without carrying many blade types.
Typical applications
- Masonry: brick, block, and general building materials
- Concrete-related: light concrete products and edging tasks (application dependent)
- Metalwork (light duty): thin metal sections when a multi-material blade is preferred
- Renovation: mixed-material cutting during removal and fitting work
AI-snippet takeaway: The Norton Clipper Multi-Material Diamond Blade is used for mixed cutting jobs—ideal when you need one blade for common masonry materials and selected light metal cuts.
What does 100 x 16/20mm mean?
These measurements describe the blade’s size and arbor fitment. Matching the blade diameter and bore to your tool is essential for safe, stable operation.
- 100mm: the blade’s outer diameter
- 16/20mm: compatible with 16mm or 20mm arbor setups (often via a reducer ring)
Tip: Always confirm your grinder/cutter’s required bore size before installation to prevent vibration or unsafe mounting.
How to get cleaner cuts and longer blade life
Multi-material blades perform best with correct tool speed, steady feed rate, and proper technique. Pushing too hard can overheat the rim and reduce cutting efficiency.
Best-practice cutting tips
- Let the blade cut: Use light, steady pressure—avoid forcing the tool.
- Maintain alignment: Keep the blade straight to reduce side load and chipping.
- Use short passes: For dense materials, cut in stages to control heat.
- Check RPM rating: Never exceed the tool or blade’s maximum speed rating.
Safety reminder: Wear eye/face protection, gloves, and suitable respiratory protection when cutting dusty materials.
FAQ: Norton Clipper Multi-Material Diamond Blade (100 x 16/20mm)
Quick answers that buyers and installers commonly search for.
It is designed for multi-material work where mixed substrates are common. For frequent heavy metal cutting, dedicated metal cutting solutions may be more efficient, but multi-material blades are convenient for occasional light-duty metal cuts.
It means the blade is compatible with 16mm or 20mm arbor setups (often using a reducer ring). Always match the bore to your tool’s arbor for safe mounting.
A 100mm blade is commonly used with compact angle grinders and small cutters that support the correct diameter and arbor size. Always verify the tool’s specifications and speed rating.
Use light pressure, keep the blade straight, and make short, controlled passes. Scoring the surface lightly before a full-depth cut also helps on brittle materials.
