FUEL AND FLAME RESISTANT POLYSULPHIDE JOINT SEALANT

Description

J-SEAL® PS-200 FR Fuel and Flame Resistant Polysulphide Joint Sealant is a two component high performance fuel resistant polysulphide joint sealant for use in concrete joints subject to attack from fuels, chemicals and biodegradation. Its jet fuel and flame resistance makes it ideal for sealing joints where fuel, oil, hydraulic fluid and skydrol spillage may occur, such as airport fueling locations, highway fueling stations, ports and wharfage. It can also be used for wastewater structures, industrial plants, pavements, roads and walkways.

Unlike many similar products on the market, J-Seal® PS-200 FR has been formulated to have a high level of ozone resistance. This results in an exceptionally high level of UV and weathering resistance leading to increased long term durability of the joint.

Uses

Limitation

J-Seal® PS-200 FR is not recommended for:

• Overhead joints

• Movement joints having a Movement Accomodation Factor (MAF) of > 25%

• Over painting with enamel or rigid paints (paint compatibility with sealant shall be checked prior to painting)

• Applied in joints wider than 50mm

• Applied in joints less than 5mm in width and depth

• Use for glazing applications

• High and/or sharp point loads

• Do not apply in rain or wet conditions, or at temperatures below 5ºC

• Do not part mix

Color

• Gun Grade: Grey

• Pouring Grade: Grey

Packaging

• Gun grade: 2.5 L / set

• Pouring grade: 4 L / set or 18 L /set