POLYSULPHIDE JOINT SEALANT PRIMER
Description
J-SEAL® PS PRIMER Polysulphide Joint Sealant Primer is a one component high penetration primer for use with J-Seal® PS-100 and J-Seal® PS-200 FR polysulphide joint sealants, which assists in forming a strong bond between the substrate and the joint sealant.
Advantages
-
The surface and joint area to be applied with primer should be dry, clean and free of dirt, dust and any foreign matter.
-
Apply a single thin even coat using a small paint brush.
-
Allow primer to become tacky or touch dry before applying the joint sealant.
-
If the primer has been applied longer than three hours, re-apply another application.
-
Refer to the joint sealant installation instructions for further information or contact CORKJOINT® if joint sealant installation training is required.
Limitation
-
Do not apply below 5°C or above 40°C
-
Avoid excessive application
-
Avoid skin contact. Refer to Health & Safety information
-
Do not discard into the water system
-
Do not smoke or use a flame close to the material
Color
Packaging
