Weberset Superflex 21 ΘαΠΤ΄ΙΧ©½Ί
DESCRIPTION
Weberset superflex 21 come in grey or white coloured, water resistant, "Single component Semi-Flexible", latex fortified (with additives) cement-based, thin or thick bed adhesive.
GENERAL PERFORMANCE
Weberset superflex 21 is fortified with additives. Requires mixing with Clean Water only; therefore eliminate use of expensive Latex Admixture and allows for easier on-site mixing. More economical & user friendly compare to conventional two-component adhesive system. Weber set superflex 21 offers improved adhesion strength, flexural strength, durability and reduce water permeability; compared to conventional cement-based adhesive.
It is specially formulated for the installation of Vitrified or Porcelain Homogenous Tiles (or other tiles / mosaics) & Marble or Granite Slabs with low water absorption rate (ie. < 0.5%) and for installation onto demanding substrate (See Application).
The set adhesive is water resistant but not impervious to water. Weberset superflex 21 is a thin or thick bed adhesive used normally at 3 – 6 mm bed thickness, but up to 12 mm for small isolated, uneven areas of limited extent.
Although in most cases it requires mixing with water only; there is special conditions where Latex Admixture (ie. webermix admix 1, webermix admix plus, webermix multibond etc.) must be used with weberset superflex 21, to further enhance the physical properties of the set adhesive.
Not recommended for use on skim-coat plaster, paint and metal.
COLOUR
%ͺ Grey
%ͺ White
PACKAGING
25kg / bag
