MyChem Silicone Sealant All Purpose is a 100% clear, one component and versatile silicone sealant which cures to a tough and waterproof seal.It is weather resistance and remains flexible from temperature of 70°F to 500°F. It provides excellent adhesion to a wide range of materials.
Application: Suitable for glass, aluminium, stainless steel, rubber, porcelain, vinyl, weather-stripping and other household materials.
Directions:
- Ensure surfaces to be bonded are dry, clean and free from dust, oil and grease.
- Pierce seal with reverse end of cap.
- Cut nozzle at 45° angle and fit it onto tube.
- Hold tube at 45° angle to push sealent ahead of nozzle.
- Remove excess sealant with cloth dampened with mineral turpentine before it skins (5-10 minutes). Sealant will be fully cure in 48 hours. At this point, any unneeded sealant can be removed by trimming with sharp blade.
- Remove nozzle and replace cap after use. Nozzle is reusable (remove sealant in nozzle after it fully cured.) Store upright in cool, dry place. Sealant should be used within 6 months after opening.
Note: For aquariums application, allow cure fully for 7 days. Wash out with water, drain and refill before inducing fish. Suitable for constructing and repairing small aquariums. Large tanks would require specialist design.
Safety And First Aid Directions:
Avoid contact with eyes and skin. Avoid breathing vapour. Product release acetic acid while curinf. Uncured sealant may cause irritation. In case of skin contact, wipe off immediately and wash with detergent. In case of eye contact, flush with water immediately for 15 minutes and seek for medical advice.
USE IN A WELL VENTILATED AREA. KEEP OUT OF REACH OF CHILDREN.
Disclaimer:
All product images shown are for illustration purpose only. Actual products may vary in term of size, brand, version, color, and other relevant characteristics.
