NippoSEAL Flex 200 Fibre Pro

NippoSeal FLEX 200 Fibre Pro is a single-component elastomeric waterproofing coating. Formulated with an acrylic copolymer and specially reinforced with micro-fibre to form a breathable waterproofing membrane that is weather resistant and UV-durable. The micro-fibre allows it to better accommodate expansion and contraction stresses. This micro-structure keeps water out but allows water vapour to escape through it.

• Ready to use and easily applied
• Increased tensile strength even without overlaying with fibreglass
• Flexible with stationary crack bridging capability
• Servers as a barrier against salts and atmospheric gases
• High build
• Versatile and multi-purpose
• UV-stable with long service life and durable
• Green Label certified
• Available in white and grey

Product Overview

Product Type

Waterproofing

Paint Type

Water-based

Finishing

Matt

Surfaces

Concrete

Recommended Number of Coats

2 - 3 Coats

Drying Time

Not Applicable

Methods of Thinning

Concrete Roof Substrate: When used as primer, dilute with approximately 30 - 50% of water

Vertical Wall Substrate: When used as primer, dilute with approximately 5 - 10% of water

Recoating Time

Minimum 2 - 3 Hours

Coverage

Horizontal Surfaces: 0.60 – 0.70kg/m² per coat

Vertical Surfaces: 0.20 – 0.30kg/m² per coat

Method of Application

Brush, Roller